its just rattle cans. i took all that soft black stuff off, primer and sanded two times, and then did 3 coats of chrome yellow to match the chrome yellow exterior.
just scraped it up from the edges in using rough snadpaper. when you get it all off and all just work down to smooth sandpaper and start primer. primer with high grit paper 2 or 3 times and then 3 coats of paint.
Just a simple 250w Pioneer head unit. And 150w Pioneers in the doors.
1100w Memphis Class D amp. It fits under my console.
Two Memphis S-Class Subs. In a homemade sealed box.
I also have a nice 1 farad cap, but Im still trying to decide where/hox to mount it. It should be within 12" of the amp, but I dont really have any room that close.
Thats too far from the amp and my power wire comes into the front side of the amp. Not to mention I have a strap around the box that goes right down the center, but It wasnt there in the picture. I will probably put it in the console and make a false bottom to cover it.
Thats too far from the amp and my power wire comes into the front side of the amp. Not to mention I have a strap around the box that goes right down the center, but It wasnt there in the picture. I will probably put it in the console and make a false bottom to cover it.
